Glossary entry (derived from question below)
Spanish term
patines
moldes
las piezas
3 | slides | liz askew |
3 +1 | skates | Luis García |
Mar 10, 2024 15:54: liz askew changed "Edited KOG entry" from "<a href="/profile/593612">Justin Peterson's</a> old entry - "patines"" to ""slides""
Proposed translations
slides
--------------------------------------------------
Note added at 22 heures (2024-03-04 21:48:02 GMT)
--------------------------------------------------
https://www.dyrtech.com/Trabajos/patines-molde-inyeccion/
--------------------------------------------------
Note added at 23 heures (2024-03-04 21:50:59 GMT)
--------------------------------------------------
It is the production tooling that holds the moulds used to produce plastic parts in injection moulding. In its simplest configuration it consists of:
- a stationary plate to which the front half of the mould is attached (typically the cavity)
- a moveable plate which carry the other half of the mould (core)
- a support and guidance system for the moveable plate (typically 4 cylindrical pins)
*****More complex parts are formed using more complex moulds, which may have movable sections called slides****.
Ejector plates, attached to an hydraulic piston, operates the ejection pins that separates the moulded part after cooling.
XE Series mould base.
--------------------------------------------------
Note added at 23 heures (2024-03-04 21:51:15 GMT)
--------------------------------------------------
https://ca-be.it/en/products.html
--------------------------------------------------
Note added at 23 heures (2024-03-04 22:02:29 GMT)
--------------------------------------------------
I am unable to find "injection mold skates" on any bona fide En site.
--------------------------------------------------
Note added at 23 heures (2024-03-04 22:06:59 GMT)
--------------------------------------------------
OR
runners
https://www.google.com/search?q= injection molding patines&c...
--------------------------------------------------
Note added at 23 heures (2024-03-04 22:17:08 GMT)
--------------------------------------------------
https://www.plasticmoulds.net/es/bebederos-y-compuertas-de-m...
Corredor
Los patines siguen canales cortados en la línea de partición en lugar de bebederos, que llevan el material al centro de la placa del molde. Su diseño afecta a la calidad de la pieza y a la eficacia del moldeo.
Los patines más gruesos pueden hacer que las presiones de llenado sean demasiado altas y provocar tiempos de ciclo largos no deseados. A la inversa, las correderas gruesas pueden alargar innecesariamente el tiempo de ciclo y aumentar los costes asociados al reafilado. El diseño óptimo de las canales debe encontrar un equilibrio entre la viabilidad del molde y las presiones de llenado.
--------------------------------------------------
Note added at 23 heures (2024-03-04 22:22:42 GMT)
--------------------------------------------------
https://skill-lync.com/student-projects/injection-molding-an...
Runners follow channels cut into the parting line, as opposed to sprues, which deliver material into the center of the mold plate. Their design affects part quality and molding efficiency.
Thicker runners can make filling pressures too high and cause unwanted long cycle times. Conversely, thick runners can cause unnecessary lengthening of cycle time and increases in costs associated with regrinding. The optimal runner design must strike a balance between mould feasibility and filling pressures.
--------------------------------------------------
Note added at 23 heures (2024-03-04 22:33:40 GMT)
--------------------------------------------------
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&c...
*****correderas, llamadas también patines*****. Se intentará simplificar este movimiento, haciendo que se mueva a la vez que el molde se abre y se cierra.
--------------------------------------------------
Note added at 23 heures (2024-03-04 22:33:57 GMT)
--------------------------------------------------
so
runners
final answer
skates
La misma referencia ésta disponible en inglés donde la manufacturera se refiere a los patines como "skates". La referencia en esta respuesta es la prosa en español y si selecciona Inglés en el tope de la página como el lenguaje preferido la prosa en inglés aparecerá.
Las dos oraciones de ejemplo fueron tomadas directamente de la prosa que se encuentra en la referencia.
"Another of the devices available to us to release the counter-outlets existing in the piece consists of sliding slides housed in the ejector plates, also called skates."
"In principle we can try to increase the section of the skate, but if this is not possible, we have two possibilities at our disposal to eliminate the problem."
agree |
slothm
15 hrs
|
neutral |
liz askew
: I am unable to find either of your references to "skates" on any En site.
22 hrs
|
The following sentence is copied directly from my reference: "Another of the devices available to us to release the counter-outlets existing in the piece consists of sliding slides housed in the ejector plates, also called skates..."
|
Something went wrong...